1. The refrigerated truck produced by our company adopts the technical route of high insulation and lightweight, and the car board is produced by the advanced wet bonding method, using high-quality unsaturated resin, and heating, pressurizing and pressing into a closed organic whole through the special large laminating machine equipment. It has the advantages of high strength and good thermal insulation performance. 2. The thickness of the top and bottom plate of the car body is 105mm, and the thickness of the side plate is 85mm. The interior and exterior surfaces of the car board are made of high-quality fiberglass steel, and the interior insulation material is high density B2 grade flame retardant polyurethane foam. There are no metal components inside the car board. The car plate is closed with glass fiber felt and reinforced with Z-shaped inside, and the bottom plate is reinforced with wooden square inside. With good heat preservation, high strength, light weight and other advantages. 3. The meat trailer roof adopts U-shaped fiber felt structure, adopts the whole aluminum alloy slideway, and adds stainless steel supporting Angle pieces inside the car body, so that the torsion resistance of the car body is greatly enhanced. It can bear 2 tons per meter, which is firm and reliable, and its weight is about 50kg/m lighter than that of other manufacturers. 4. The body adopts polyurethane adhesive structure, which has good sealing performance, light weight, excellent thermal insulation performance and high overall strength. According to the third party test, the heat transfer coefficient, leakage ratio, thermal insulation performance, mechanical strength and total heat transfer coefficient of the cage all meet the technical requirements of the national standard "GB 29753-

1. The refrigerated truck produced by our company adopts the technical route of high insulation and lightweight, and the car board is produced by the advanced wet bonding method, using high-quality unsaturated resin, and heating, pressurizing and pressing into a closed organic whole through the special large laminating machine equipment. It has the advantages of high strength and good thermal insulation performance.

2. The thickness of the top and bottom plate of the car body is 105mm, and the thickness of the side plate is 85mm. The interior and exterior surfaces of the car board are made of high-quality fiberglass steel, and the interior insulation material is high density B2 grade flame retardant polyurethane foam. There are no metal components inside the car board. The car plate is closed with glass fiber felt and reinforced with Z-shaped inside, and the bottom plate is reinforced with wooden square inside. With good heat preservation, high strength, light weight and other advantages.

3. The meat trailer roof adopts U-shaped fiber felt structure, adopts the whole aluminum alloy slideway, and adds stainless steel supporting Angle pieces inside the car body, so that the torsion resistance of the car body is greatly enhanced. It can bear 2 tons per meter, which is firm and reliable, and its weight is about 50kg/m lighter than that of other manufacturers.

4. The body adopts polyurethane adhesive structure, which has good sealing performance, light weight, excellent thermal insulation performance and high overall strength. According to the third party test, the heat transfer coefficient, leakage ratio, thermal insulation performance, mechanical strength and total heat transfer coefficient of the cage all meet the technical requirements of the national standard "GB 29753-2013 Safety requirements and test methods for refrigerated Trucks Transporting Food and biological products on Road".

5. The back door and side door adopt the diagonal structure, which saves the effort to open. The labyrinth type EPDM rubber seal strip is used, which has the advantages of low temperature resistance, no aging, good sealing performance and good sealing performance.

6. The rear door frame is welded with 304 stainless steel profiles, and the four corners are strengthened by L. The rear door is made of stainless steel lock and hinge, with high overall strength, corrosion resistance, beautiful and generous.

7. Aluminum alloy edge covering, stainless steel Angle covering, aluminum alloy rain cover and rear side door lower protection plate are used for the exterior of the car body. The whole car adopts 3C certification LED cold light source lamps, high brightness, energy saving. It doesn't fade. Pasted GB reflective mark and sign board.

8. The subframe is made of 510L high-strength beam steel with high strength and no deformation or cracking. By optimizing the structure, the frame is torsional and bending resistant, and the force is even.

9. Optional aluminum guide rail, patterned aluminum plate, cargo stop trough, ventilation trough and so on can be installed inside the body.

YOGOMO(HEBEI)MOTORS CO.,LTD

Free Member 0 Chinese Supplier