MENU
China Chamber of Commerce

Overseas Economic and Trade Zones

Confirm
Cancel
x

Ok
x
Sign into your account
Member ID or Email
Join Free
Ac servo motor driver 100w-7.5kw
Ac servo motor driver 100w-7.5kw
Ac servo motor driver 100w-7.5kw
Ac servo motor driver 100w-7.5kw
Ac servo motor driver 100w-7.5kw
Ac servo motor driver 100w-7.5kw

Ac servo motor driver 100w-7.5kw

Trading Company,Manufacturer

  • Product Details
  • Company Profile

have normal type driver . also have better quality type driver . have 220v .and 380v driver

SG-AS series   servo motor drives


Performance parameters


Control modePosition control, JOG operation, speed contacts, etc.
Encoder feedbackOrdinary incremental encoder: 2500 lines incremental standard type 2500 line incremental province-wire serial encoder: 217/216 bit absolute encoder
Conditions of UseAmbient temperature / storage temperatureAmbient temperature: 0 ~ + 50 ℃, Storage temperature: -20 ~ + 85 ℃
Humidity / storage humidity90% RH or less (no freezing or condensation)
Resistance to vibration / impact resistance4.9m/s2/19,6m/s2
StructureBase mount
PerformanceSpeed control range1:10000(Lower limit of the speed control range is the smooth operation at rated load without crawling)
Speed response1KHz
Rate volatility (load variation)0 to 100% load; 0% (rated speed)
Rate volatility (voltage variation)Rated voltage ± 10%: 0% (rated speed)
Rate volatility (temperature variation)25 ± 25 ℃: ± 0.1% or less (rated speed)
Analog speed command inputCommand voltageDC±10V
Input impedanceApproximately20KΩ
Circuit time parameter47 μ s
Analog torque command inputCommand voltage
DC±10V
Input impedance

约20KΩ

Circuit time parameter47 μ s
Sequence input signalCount8Point
Function (distribution)Servo ON (/ S-ON), P action (/ P-CON), prohibits Story side driving (P-OT), prohibiting reverse side driving (N-OT), alarm reset () / ALM-RST, positive Zhuance torque limit (/ P-CL), reverse the measured torque limit (/ N-CL), the position deviation is cleared (/ CLR), the internal set speed switching can be allocated and the signal of the positive / negative logic change
Sequence output signalCount6Point
Function (distribution)Servo alarm () ALM positioning completion (/ COIN) consistent speed detection (/ V-COMP) servo motor rotation detection (/ TGON) Servo ready (/ S-RDY), torque limit detection (/ CLT) Brakes (/ BK) encoder zero output (PGC) can be assigned as well as the positive / negative logic of the signal change
Encoder Dividing pulse outputA phase, B phase, C: linear drive output; divider pulses: can be arbitrarily set
RS-485CommunicationsProtocolMODBUS
1:N CommunicationCan be up to N = 127 station
Axis address settingBy parameter setting
CANCommunicationsProtocolCANOpen (DS301 + DS402 profile)
1:NCommunicationCan be up to N = 127 station
Axis address settingBy parameter setting
Display FunctionCHARGE LED, 7-segment 5
Regeneration treatmentBuilt-in regenerative resistor or external regenerative resistor (optional)
Overtravel (OT) prevention functionP-OT、N-OT Enter the action of dynamic brake (DB) stop, deceleration stop or free-run stop
ProtectionOvercurrent, overvoltage, undervoltage, overload, speeding, regeneration fault, encoder feedback error, etc.
Monitoring functionsSpeed, current position, command pulse accumulation, position deviation, motor current, operating status, input and output signals
Accessibility FeaturesGain adjustment, alarm recording, JOG operation, origin search, inertia testing
Smart featuresBuilt-in automatic gain tuning function
Use load inertiaLess than 5 times of motor inertia
Position controlFeedforward compensation0~100%(Setting unit 1%)
Input pulse typesSign + pulse train, CW + CCW pulse train, 90 ° phase difference between the two-phase pulse (A phase + B phase)
Input pulse formSupports linear drive, open collector
Maximum input pulse frequency

Linear drive

Sign + pulse train, CW + CCW pulse sequence: 500K pps

90 ° phase difference between the two-phase pulse (A phase + B-phase): 500K pps

Open Collector

Sign + pulse train, CW + CCW pulse sequence: 200K pps

90 ° phase difference between the two-phase pulse (A phase + B-phase): 200K pps


Send Inquiry to This Supplier

  • Title
  • From*
  • toBILL
  • Message*
  • Minimum Order Quantity*
  • Unit
  • Verification Code*