Rated Power£º400KW~1000KW Capacity£º500KVA~1250KVA Degree of Protection£ºIP23 to IP55 Insulation Class£ºF/H

STANDARD

Evotec Power synchronous generators are designed and manufactured in compliance with IEC60034-1; IEC; GB755, BS4999-5000 and NEMA MG 1.22.

EvoTec Power machines are CE marking approved.

DYNAMIC BALANCING

The rotating part (rotor) is dynamically balanced with greater precision than that required by the standard IEC 60034-14 or ISO2372, ensuring minimum levels of residual unbalance.

OVERLOADS

The generators are capable of delivering an overload of 10% for 1 hour after 12 hours of running for Continuous Duty (S1). No overloads are allowed in Stand-by Duty.

THREE PHASE SHORT CIRCUIT CURRENT

EvoTec Power generators ensured a three phase short-circuit current higher than 3 times the rated current (>300%In)

INTERFERENCE

TIF value is <50 and THF is <2%

PARALLEL OPERATION

All generators are suitable for parallel operation with similar generators, when equipped with the parallel unit.

VACUUM PRESSURE IMPREGNATION (VPI)

Developed with the latest technology, the impregnation system by continuous flow is normally used by EvoTecPower for low voltage winding, ensuring perfect insulation and protection.

Besides the impregnation, the static windings receive a protection coating as an additional protection against infiltration of humidity, dust, etc. For bigger alternators, windings are impregnated with high quality material and using the latest Vacuum Pressure Impregnation (VPI)

WINDING AND INSULATION SYSTEM

The armature coils of the stator main winding are made from dual coated, Class H copper wires, single/double layer concentric fractional pitched windings offers simplicity, reduced overhangs, neat look while reduce voltage distortion and superior capability to cope with non-linear loads.

ANHUI EVOTEC POWER GENERATION CO., LTD.

CCCME Member 0 Chinese Supplier

CCCME Member

Recommended by CCCME